Welcome to SingStar Rocks!
Get ready to go on tour and perform some of the coolest rock hits around. Let loose and go for it, and before you know it you'll have the audience demanding an encore.
This doesn't have to be a solo performance. With loads of team contests and head-to-head battles, you may find yourself with a lot of competition for the headline slot! Get your mates around, grab a mic and get on with the show!
Setting Up
Set up your PlayStation®2 computer entertainment system according to the instructions in its instruction manual. Check that the I/O indicator on the front of the console is lit up red.
•
Press the I/O/RESET button and the I/O indicator will light up green.
•
Press the ^ button on the front of the console to open the disc cover and place the SingStar® Rocks! disc in the disc holder with the label side facing upwards. Press lightly until the disc clicks into place.
•
Close the disc cover by pressing firmly until you hear a click.
SingStar® Rocks! will then commence loading. It is advised that you do not insert or remove accessories once the power is on.
Owners of SCPH-30000 and SCPH-50000 series consoles should refer to the setup instructions supplied with the console. Before commencing play, it is recommended that you select your preferred language from the console's System Configuration menu.
Throughout this manual, the term "EyeToy® Camera" is used to describe the EyeToy® USB Camera (for PlayStation®2).
Please Note
The information in this manual was correct at the time of going to print, but some minor changes may have been made late in the product development. All screenshots for this manual have been taken from the English version of this product, and some screenshots might have been taken from pre-completion screens that differ slightly from those in the finished product.
Setting Up the Microphones
1. Plug the SingStar® USB Converter into one of the USB connectors on the front of the console.
2. Plug the microphones into the red and blue sockets on the front of the SingStar® USB Converter. A 'click' sound will confirm that each connector is inserted correctly.
3. Once the game has loaded, a bright blue light on the top of the SingStar® USB Converter will indicate that it is inserted correctly and working.
4. When singing hold the microphone approximately 3-5 centimetres (1-2 inches) from your mouth. Sing directly into the top of the microphone.
5. Keep some distance between yourself and the TV. If the microphone gets too close to the TV, you will get feedback - a loud, high-pitched sound.
6. Just Sing!
Microphone Note
Only the official SingStar® red and blue microphones can be used to play SingStar® Rocks!. Ordinary microphones cannot be inserted properly into the SingStar® USB Converter and will therefore not be picked up by the game.
If the SingStar® USB Converter is connected, but with incompatible microphones inserted, the game will still appear to run, but players' singing will not be detected, nor will their voice be drawn on-screen.
Memory Card (8MB) (for PlayStation®2)
Throughout this manual, the term "Memory Card" is used to describe the Memory Card (8MB) (for PlayStation 2) - (product code SCPH-10020 E). Memory Cards (product code SCPH-1020 E) designed for use with PlayStation® (PS one®) format software are not compatible with this game. To save game settings and progress, insert a Memory Card into MEMORY CARD slot 1. Make sure there is enough free space on your Memory Card before commencing play. On start-up, any saved SingStar® Rocks! options data present on the Memory Card will auto-load.
Warning
This title uses an autosave feature. Insertion of a Memory Card after start-up may result in data being overwritten.
Controls
In SingStar® Rocks!, microphones are used to play each game mode. Your vocal performance is transferred into on-screen data, allowing you to score points and see how well you are singing, whilst also being emitted from your TV's speakers. In this game the only thing you need to control is your voice!
In order to navigate through menu screens and adjust volume levels in-game you will need to insert an Analog Controller (DUALSHOCK®2) into controller port 1 before commencing play.
Directional Buttons
In this manual, ↑, ↓, ←, →, etc. are used to denote the direction of the directional buttons on the Analog Controller (DUALSHOCK®2), Analog Controller (DUALSHOCK®) or Digital Controller.
•
Left Analog Stick ( Button)
•
Right Analog Stick (Button)
Controller Actions
•
↑ or ↓ button: Highlight Option/Select Song
•
▲ button: Confirm/Continue
•
L1 button: Increase Player Volume
•
L2 button: Decrease Player Volume
Getting Started
Following a short cinematic sequence, the Title Screen will be displayed. Press the ▲ button to access the Choose Mode Screen.
Choose Mode Screen
Press ↑ or ↓ to highlight one of the following options and
.png)
.png)
.png)
.png)
.png)
.png)
_1.png)
.png)
.png)
_1.png)
.png)
.png)
_1.png)